Rover & Land Rover

Sealey VS120 - Suitable for all Rover models detailed below including latest 2.0 SDI direct injection engine. Designed for use on both diesel and petrol engines. Includes petrol twin cam locking tools. Supplied in carry-case with warning tag.

Sealey VS123 - Set provides the timing pins and tensioner adjustment tools required for timing belt replacement on all the variants of the Rover 2.0 diesel engine fitted in Honda, Land Rover and MG-Rover models.

Sealey VS1288 - It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tool...

Sealey VS129 - Diesel Engine Camshaft Locking & Fuel Injection Pump Timing Kit 14pc - Land Rover.

Kit contains specialised tools required for cam belt replacement without losing the engine camshaft and injection pump timing. Suitable for 2.5D, ...

Sealey VS1290 - Set includes all engine timing belt replacement tools for the 2.0 and 2.5 variants of the KV6 quad cam engine. The tools necessary to time later versions of these engines are not all the same as the tools needed to time earlier eng...

Sealey VS1291 - Suitable for locking the flywheel in the timed position on Land Rover models fitted with EDC (Electronic Diesel Control) and manual transmission.

Sealey VS1292 - Use in conjunction with VS1290 kit for Rover KV6 engine variants. Designed to counter-hold the crank pulley whilst releasing and tightening the centre bolt. The pulley must be removed for timing belt replacement.

Removes the diesel pump and retains the pump sprocket in-situ so that the sprockets/timing chain configuration remains undisturbed, minimising the level of engine disassembly. Essential for transversely fitted engines. For engine timing use Settin...

Sealey VS4617 - Suitable for setting the camshafts, of the MG Rover KV6 190 engine, in the timed position.

Sealey VS4738 - Flywheel locking tool engages with ring gear and locks flywheel/crankshaft for pulley removal.